Project Description

3WAY REDUCING BORE FXFX PN40

3WAY REDUCING BORE FXFX PN40

Nickel plated reducing bore 3-way ball valve suitable for a wide variety of sectors: domestic water services, HACV, non-dangerous aeroforms, liquid hydrocarbon and pneumatic systems. Do not use with steam.

Available with the following threading according to ISO 228/1: Female/female
Maximum working temperature: 100°C – no steam

HOW TO INSTALL
Ball valves are bi-directional, they could handle the flow in both directions.

To install a ball valve correctly:

  1. Make sure that the pipes are well aligne;
  2. Place the fixing tool in the part of the valve which is closer to the pipe;
  3. Do not exceed in using sealing materials such as (PTFE or other material), use it only on the thread.
  4. In presence of impurities in the fluid (such as limestone, dust or sand) install a strainer (see our items 411-412-411CM-412CM) to avoid damages to the ball and the seals.

HOW TO UNINSTALL
Place the unfixing tool in the part of the valve which is closer to the pipe. Relief the pressure in the pipeline by opening the valve and allow the fluid to come out; unscrew the connections from the valve.

MAINTENANCE
It is important to verify the valves periodically to make sure that the valve is in good working conditions. The valve is supplied at opening position.
The opening and the closing are made by a 90° rotation of the handle. In the opening position, the handle is along the body of the valve, while in the closing position the handle is across the body. The ball valve is an interception valve and not a regulation one, therefore it must be completely opened or closed; if left at an intermediate position, seals could be damaged.
Only if you have to empty the pipe system, to prevent from frost problems, the valve must be opened at an intermediate position (45°) up to the complete discharge of the liquid, after that the valve could be fully opened.
It is suggested not to use the valve for liquids with abrasive suspensions.

DISPOSAL
For valve operating with hazardous liquids(toxic, corrosive…) , if there is a possibility of residue remaining in the valve, take due safety precaution and carry out required cleaning operation. Personnel in charge must be trained and equipped with appropriate protection devices.
Prior to disposal, disassemble the valve and separate the component according to various materials. Please refer to product literature for more information. Forward sorted material to recycling (e.g. metallic materials) or dispose it, according to local and currently valid legislation taking into consideration the environment.