Project Description

DUCTILE FLANGED CAST IRON
WITH SOFT SEALING GATE VALVE, PN16

DUCTILE FLANGED CAST IRON WITH SOFT SEALING GATE VALVE, PN16

Ductile cast iron flanged soft sealing gate valve, inside screw, handwheel operated, 100% full bore, PN16; flanged according to EN 1092-2 with raised face. Face-to-face length according to EN 558-1, basic series 14. Inside screw thread clockwise closing, o-ring packing, back seats provided. Minimal pressure drop. Hydrostatically tested according to EN 12266-1: Test type P10-P11-P12 Rate A. Pressure Equipment Directive 2014/68/UE Group 2.

Suitable for flow rate adjustment and for installation in:

  • Potable water
  • Food industry
  • Water treatment
  • Fire fighting
  • Irrigation

AVAILABLE MODEL

265CG: Soft sealing ductile cast iron flanged gate valve, PN16

OPERATION
OPENING: an anti-clockwise rotation of the hand wheel will open the valve. When it will go no further return the hand wheel clockwise 1/2 turn.
CLOSURE: a clockwise rotation of the hand wheel will close the valve. Closure will be confirmed when the handle can be turned no further.
CAUTION: Service applications with extremes of temperature may cause the wedge to become tight in the valve. The valve may be become stiff to operate in these circumstances. Suitable hand protection should be worn when operating valves used in extreme temperature applications.

PRESSURE/TEMPERATURE RATING
Valves must be installed in a piping system whose normal pressure and temperature does not exceed the stated rating of the valve. It may be hazardous to use these valves outside of their specified pressure and temperature limitations. To ensure ease of operation, adjustment, maintenance and repair, valve siting should be decided during the system design phase. To prevent imposing strain on the valve seat, pipe work and valves must be adequately supported.

DISPOSAL
For valve operating with hazardous liquids(toxic, corrosive…) , if there is a possibility of residue remaining in the valve, take due safety precaution and carry out required cleaning operation. Personnel in charge must be trained and equipped with appropriate protection devices. Prior to disposal, disassemble the valve and separate the component according to various materials. Please refer to product literature for more information. Forward sorted material to recycling (e.g. metallic materials) or dispose it, according to local and currently valid legislation taking into consideration the environment.