Project Description



Brass threaded gate valves, available in the following versions:

205/05S: Brass gate valve heavy type, FxF, PN 20

215/15S: Brass gate valve normal type, FxF, PN16

220: Brass gate valve ligth type, FxF, PN10

255: Brass gate valve normal type, MxF, PN16

240: Brass gate valve built-in type, FxF  PN10

D26/D27: Brass pump gate valve, PN16

230: Brass gate valve with drain cock and plug, FxF PN16

download technical data sheet 205-05S
download technical data sheet 215-15S
download technical data sheet 220
download technical data sheet 255
download technical data sheet 240
download technical data sheet D26-D27
download technical data sheet 230

OPENING: an anti-clockwise rotation of the hand wheel will open the valve. When it will go no further return the hand wheel clockwise 1/2 turn.
CLOSURE: a clockwise rotation of the hand wheel will close the valve. Closure will be confirmed when the handle can be turned no further.
CAUTION: Service applications with extremes of temperature may cause the wedge to become tight in the valve. The valve may be become stiff to operate in these circumstances. Suitable hand protection should be worn when operating valves used in extreme temperature applications.

Valves must be installed in a piping system whose normal pressure and temperature does not exceed the stated rating of the valve. It may be hazardous to use these valves outside of their specified pressure and temperature limitations. To ensure ease of operation, adjustment, maintenance and repair, valve siting should be decided during the system design phase. To prevent imposing strain on the valve seat, pipe work and valves must be adequately supported.

For valve operating with hazardous liquids(toxic, corrosive…) , if there is a possibility of residue remaining in the valve, take due safety precaution and carry out required cleaning operation. Personnel in charge must be trained and equipped with appropriate protection devices. Prior to disposal, disassemble the valve and separate the component according to various materials. Please refer to product literature for more information. Forward sorted material to recycling (e.g. metallic materials) or dispose it, according to local and currently valid legislation taking into consideration the environment.