Project Description

CAST IRON, FLANGED OVAL BODY, GATE VALVE, PN16

Cast iron flanged, inside screw, soft sealing, oval body gate valve, handwheel operated, 100% full bore, PN16. Face-to-face length according to EN 558-1, basic series 15. Flanged according to EN 1092-2 PN16 with raised face. Inside screw thread clockwise closing, adjustable stuffing box. Minimal pressure drop. Hydrostatically tested according to EN 12266-1: Test type P11-P12 Rate A. Pressure Equipment Directive 2014/68/UE Group 2.

Suggested for installation in:

  • Industrial plants
  • Sewage water
  • Water treatment
  • Air-conditioning systems (HVAC)
  • Central heating and cooling circuits
  • Non-aggressive fluids
  • Tanks
  • Irrigation
  • Fuel

AVAILABLE MODEL

266: Cast iron flanged gate valve oval body,  PN16

OPERATION
OPENING: an anti-clockwise rotation of the hand wheel will open the valve. When it will go no further return the hand wheel clockwise 1/2 turn.
CLOSURE: a clockwise rotation of the hand wheel will close the valve. Closure will be confirmed when the handle can be turned no further.
CAUTION: Service applications with extremes of temperature may cause the wedge to become tight in the valve. The valve may be become stiff to operate in these circumstances. Suitable hand protection should be worn when operating valves used in extreme temperature applications.

PRESSURE/TEMPERATURE RATING
Valves must be installed in a piping system whose normal pressure and temperature does not exceed the stated rating of the valve. It may be hazardous to use these valves outside of their specified pressure and temperature limitations. To ensure ease of operation, adjustment, maintenance and repair, valve siting should be decided during the system design phase. To prevent imposing strain on the valve seat, pipe work and valves must be adequately supported.

DISPOSAL
For valve operating with hazardous liquids(toxic, corrosive…) , if there is a possibility of residue remaining in the valve, take due safety precaution and carry out required cleaning operation. Personnel in charge must be trained and equipped with appropriate protection devices. Prior to disposal, disassemble the valve and separate the component according to various materials. Please refer to product literature for more information. Forward sorted material to recycling (e.g. metallic materials) or dispose it, according to local and currently valid legislation taking into consideration the environment.